A Snow and ski forum. SkiBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » SkiBanter forum » Skiing Newsgroups » Backcountry Skiing
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Rigging snow shovel blade as a deadman snow anchor



 
 
Thread Tools Display Modes
  #1  
Old May 16th 04, 11:09 PM
Howard
external usenet poster
 
Posts: n/a
Default Rigging snow shovel blade as a deadman snow anchor

I have a Voile snow shovel with two holes in the blade for rigging it as a
deadman snow anchor. Any recommendations on the best material to pass
through the blade holes? 1" tubular webbing? Can a correctly planted snow
shovel be expected to behave like a snow fluke (e.g. if offset from the
slope by 40°) in wet or slushy snow?

Thanks.

Howard


Ads
  #2  
Old May 17th 04, 02:36 PM
external usenet poster
 
Posts: n/a
Default

-----BEGIN PGP SIGNED MESSAGE-----

In article m,
Howard nun wrote:
I have a Voile snow shovel with two holes in the blade for rigging it as a
deadman snow anchor. Any recommendations on the best material to pass
through the blade holes? 1" tubular webbing? Can a correctly planted snow
shovel be expected to behave like a snow fluke (e.g. if offset from the
slope by 40°) in wet or slushy snow?


_ Traditionally, those holes are for rigging an emergency sled or
creating a simple strap carrying system. They aren't meant for
rigging a snow fluke. Thin metal edges and nylon webbing and rope
aren't a good combo, there's nothing I would trust. There is a
reason snow flukes have metal cable connections. The best way to
use a shovel is as a standard deadman with a sling around the
shaft, of course if you do that you don't have anything to dig
the deadman out with. Snow flukes make crappy shovels and
shovels make dangerous snow flukes.

_ Booker C. Bense


-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBQKjN22TWTAjn5N/lAQGLHQQAtHTjzJIgt+QX6lJPE743ko7UDQkh3uqZ
Qk+GHj0+pfEoQBuxY2V0jZxlI24WO5zYV/kwToFPiZIkbNrOFCLis6OOUXccACkv
tTNruPWx7uW7mW4iMYXaXK7/qfJ1HvNExxqUEAqN0w1QwoCSyoC7fxnheYck3CJL
ZoWu7ViTOvE=
=ttQ7
-----END PGP SIGNATURE-----
  #3  
Old May 17th 04, 03:46 PM
Bernd Nebendahl
external usenet poster
 
Posts: n/a
Default

reason snow flukes have metal cable connections. The best way to
use a shovel is as a standard deadman with a sling around the
shaft, of course if you do that you don't have anything to dig
the deadman out with. Snow flukes make crappy shovels and
shovels make dangerous snow flukes.


I would not recommend to use a shovel as deadman. The shaft is
not strong enough for that purpose. Even ice axes might not qualifiy
for the usage as deadman (there is a UIAA norm for shafts).

Bernd


  #4  
Old May 17th 04, 04:11 PM
Mike Garrison
external usenet poster
 
Posts: n/a
Default

bbense+rec.climbing.rec.skiing.backcountry.May.17.
wrote:

Snow flukes make crappy shovels and
shovels make dangerous snow flukes.


Both are better than nothing, though. But if you expect to
need pickets or flukes, you probably should just carry
pickets or flukes.

Another common mod I have seen for metal snow shovel blades
is holes cut in the blade in just the right spot to turn it
into a platform for a Whisperlite stove.
  #6  
Old May 17th 04, 09:08 PM
Mike Garrison
external usenet poster
 
Posts: n/a
Default

"Michael A. Riches" wrote:

I have used things like trekking poles, mountain axes, tree branches and the
likes, very successfully, for anchoring tents, in all kinds of weather.


My absolute favorite tent anchors are nylon mesh stuff sacks
filled with snow. They hold insanely well. The snow inside
the sack bonds to the snow outside the sack, and you end up
with a web of nylon imbedded in the snow.

Not really any more work than any other kind of deadman; you
don't bury any hardware that you need, and four or five
nylon mesh bags weigh almost nothing.
  #8  
Old May 18th 04, 04:02 PM
Brian in SLC
external usenet poster
 
Posts: n/a
Default

Mike Garrison wrote in message ...
"Michael A. Riches" wrote:

I have used things like trekking poles, mountain axes, tree branches and the
likes, very successfully, for anchoring tents, in all kinds of weather.


My absolute favorite tent anchors are nylon mesh stuff sacks
filled with snow. They hold insanely well. The snow inside
the sack bonds to the snow outside the sack, and you end up
with a web of nylon imbedded in the snow.

Not really any more work than any other kind of deadman; you
don't bury any hardware that you need, and four or five
nylon mesh bags weigh almost nothing.


Me too. I use just standard smallish stuff sacks, about the size of
one built for an ultralight thermarest. Ones I use come with a kind
of daisy chain webbing loop sewn onto the side. Nice. I clip them to
the tent with nylon clips. Seems pretty bomber once the snow sets up.
And...no biggie if they get trashed, seem to work fine even cut to
shreds. Yep, they hold insanely well is how I'd describe them.

Brian in SLC
  #9  
Old May 18th 04, 04:36 PM
Bernd Nebendahl
external usenet poster
 
Posts: n/a
Default

My absolute favorite tent anchors are nylon mesh stuff sacks
filled with snow. They hold insanely well. The snow inside
the sack bonds to the snow outside the sack, and you end up
with a web of nylon imbedded in the snow.

Not really any more work than any other kind of deadman; you
don't bury any hardware that you need, and four or five
nylon mesh bags weigh almost nothing.


How about getting those anchors out? Isn't it a problem to dig them out
once they are frozen to the snow? I used traditional (Bibler) snow and sand
anchors on Denali and even those where hard to dig out after a few days.

Bernd



  #10  
Old May 19th 04, 12:13 AM
Mike Garrison
external usenet poster
 
Posts: n/a
Default

Bernd Nebendahl wrote:

How about getting those anchors out? Isn't it a problem to dig them out
once they are frozen to the snow?


Yes. That is the main problem. I have had to chip them out
with the ice axe adze on occasion, but I can usually get
them out with just a shovel. However, I would rather have my
tent anchored to something that is difficult to remove than
to have it anchored to something that melts out after a few
hours of midday sun.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Snow Blower to Get Out and Ski, or Shovel for Exercise? Gary Jacobson Nordic Skiing 3 January 13th 05 10:41 PM
Measuring the quality of snow Pieter Litchfield Nordic Skiing 13 December 17th 04 06:49 PM
Near fatal ski incident Me Nordic Skiing 22 February 27th 04 02:47 PM


All times are GMT. The time now is 11:43 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 SkiBanter.
The comments are property of their posters.