If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
pilot binding - broken yellow pull tab
the yellow pull tab on my pilot binding ripped off - just as I thought
it would do the first time I saw how it was designed. can this be repaired? please tell me that I dont have to buy a set of new bindings. -Wayne |
Ads |
#2
|
|||
|
|||
Wayne,
You can get replacement tabs ... you won't have to buy new bindings. Catch is ... the tabs are a little tricky to get mounted back in your binding. Persevere and you'll get the new tabs installed. I'm not sure about where you live, but good ski shops, like our locals ones, give out replacement Pilot tabs for free. Another option is to make your own "tabs" out of perlon nylon cord. These will last forever and you will never have the broken tab problem again. Yes - these flimsy Pilot tabs are on the top 5 list of dumbest ski equipment ideas. TK |
#3
|
|||
|
|||
You don't have to buy new bindings, but you will need
to buy new pull tabs. they're way overpriced, but nowhere near the cost of new bindings. I wonder if there are differences in quality in these things. I have one pair of Pilot bindings where the tabs broke within 2 months, and another where the same tabs have lasted 2 years. hmmm. Chris C SLC, UT --- Wayne Harper wrote: the yellow pull tab on my pilot binding ripped off - just as I thought it would do the first time I saw how it was designed. can this be repaired? please tell me that I dont have to buy a set of new bindings. -Wayne __________________________________ Do you Yahoo!? Check out the new Yahoo! Front Page. www.yahoo.com |
#4
|
|||
|
|||
again. Yes - these flimsy Pilot tabs are on the top 5 list of dumbest
ski equipment ideas. TK I thought it was top 1... What are the others 4 ? |
#5
|
|||
|
|||
Laurent,
You are right ... Salomon Pilot binding tabs would hold the number 1 bad design honor. As far as the remaining 4 of the top 5? What do people think? My nominations: - the "kangaroo poles", forgot the manufacturer - they were bent aluminum poles that were supposed to whip back after you compressed them and shoot you forward. - the big rubber 1st generation Swix paddle grips - they were super clumsy and basically doubled the weight of your poles - the old Concept II carbon fiber poles that had the basket that was part of the pole. If you broke the basket - you had to buy a new pole - the first Generation Fischer skate-cuts - they were way slower than straight-cut skis (Fischer discontinued them quickly, and to save face, for now, has brought out the "reduced" skate cut skis) I'm sure I'm forgetting some classic skidiot (ski-idiot) designs. Anyone else? TK |
#6
|
|||
|
|||
--- Tim Kelley wrote: Laurent, You are right ... Salomon Pilot binding tabs would hold the number 1 bad design honor. I'm sure I'm forgetting some classic skidiot (ski-idiot) designs. Anyone else? Javelin tip skis. Made the ski want to track outward when snow plowing or turning. Many a face plant... Rob B. |
#7
|
|||
|
|||
Thanks, its good to know I wont have to get a new binding
It's actually lasted several years which is longer than I expected |
#8
|
|||
|
|||
How about Look Contact bindings.
Is there even one pair still intact out there? Tim ----- Original Message ----- From: "Tim Kelley" To: "Multiple recipients of list NORDIC-SKI" Sent: Wednesday, November 03, 2004 2:39 PM Subject: pilot binding - broken yellow pull tab Laurent, You are right ... Salomon Pilot binding tabs would hold the number 1 bad design honor. As far as the remaining 4 of the top 5? What do people think? My nominations: - the "kangaroo poles", forgot the manufacturer - they were bent aluminum poles that were supposed to whip back after you compressed them and shoot you forward. - the big rubber 1st generation Swix paddle grips - they were super clumsy and basically doubled the weight of your poles - the old Concept II carbon fiber poles that had the basket that was part of the pole. If you broke the basket - you had to buy a new pole - the first Generation Fischer skate-cuts - they were way slower than straight-cut skis (Fischer discontinued them quickly, and to save face, for now, has brought out the "reduced" skate cut skis) I'm sure I'm forgetting some classic skidiot (ski-idiot) designs. Anyone else? TK |
#9
|
|||
|
|||
"Tim Akers" wrote in message
news:000901c4c1f1$dcce4040$6401a8c0@oxfordnetworks .net... How about Look Contact bindings. Is there even one pair still intact out there? Tim I used the Contact bindings and considered them better than the Salomon SNS bindings I had been using before. They had a mechanical hinge instead of the flexible plastic that was either part of the binding in the SNS system or part of the boot in previous systems such as NN 50 mm and Adidas. Rotefella then came up with a better idea when they put the pin of the hinge on the boot and made the clasp of the hinge part of the binding. This was an improvement in that the rubber bumper was more efficient and more durable and the attachment of the boot to the binding more secure and easier to engage. Salomon then copied the NNN structure for their Profile bindings. I consider the Look Contact bindings to be an incremental improvement rather than a bad idea. However the plastic rubber bumpers in the Contact system that were always either breaking down or getting lost were not very well thought out. Scott |
#10
|
|||
|
|||
I remembered another ski product with its flaws - the original Adidas
ski bindings with the tiny little metal pin you had to thread through the tiny little holes in the binding and the tab off the front of your boot. When the hole in your boot iced up ... you had big problems. I remember at the start of the Jr. race at Holmenkollen once in the mid 70's ... Marty Hall ended up helping me at the start line. He was struggling to get the pin through my boot. The starter said 'GO' and the whole stadium was watching while I stood at the starting line and Marty struggled with my boot. Finally, 5-6 seconds after my start time, Martly muscled the pin into place and I took off ... embarassed by the hoots of the crowd, but relieved. One thing about the bindings though ... I don't think there has ever been a lighter binding made. Marty - if you ever read this ... If I never said it then ... "Thanks for helping me get off the starting line!" You were the best! |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pilot Boots with Classic Skis? What binding? | Mark Frost | Nordic Skiing | 3 | November 5th 03 08:40 PM |
Pilot binding system -- what's the point? | Ken Roberts | Nordic Skiing | 1 | August 14th 03 03:28 PM |