A Snow and ski forum. SkiBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » SkiBanter forum » Skiing Newsgroups » Nordic Skiing
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

How to remove Salomon SNS Profil binding?



 
 
Thread Tools Display Modes
  #1  
Old February 9th 09, 09:07 PM posted to rec.skiing.nordic
jeff potter
external usenet poster
 
Posts: 191
Default How to remove Salomon SNS Profil binding?

I have a set of skis with the Salomon SNS Profil manual bindings on
them. Skate model.

What's a good way to remove them?

I see what looks like a plug at the rear of the heel plate but they're
not easily removed. I can keep trying.

I've removed the rubber bumpers. The plastic "S" snap-cover in the
front-center of the binding, over the front-center screw, doesn't seem
to want to come off. Do I just work a screwdriver under the front edge
somehow?

How do I expose the 2 side-screws? I don't see how to release the
"bail" so that it can flip out of the way.

Help? Links?

Thanks, JP
Ads
  #2  
Old February 9th 09, 11:43 PM posted to rec.skiing.nordic
ADK Skier
external usenet poster
 
Posts: 137
Default How to remove Salomon SNS Profil binding?

On Feb 9, 4:07*pm, jeff potter wrote:
I have a set of skis with the Salomon SNS Profil manual bindings on
them. Skate model.

What's a good way to remove them?

I see what looks like a plug at the rear of the heel plate but they're
not easily removed. I can keep trying.

I've removed the rubber bumpers. The plastic "S" snap-cover in the
front-center of the binding, over the front-center screw, doesn't seem
to want to come off. Do I just work a screwdriver under the front edge
somehow?

How do I expose the 2 side-screws? I don't see how to release the
"bail" so that it can flip out of the way.

Help? Links?

Thanks, JP


Jeff,
I've removed tons of these bindings. It really doesn't take rocket
science. Most of the time I can get my Swiss Army knife to remove the
plug in the back. Hold it vertically and run it around the plug as you
work it up. I have also used a real small drill bit and drilled a hole
in it and they ride up the drill bit. The S cap in the front comes up
really easy with the edge of my Swiss Army knife. Get the blade under
it and pry up. Than I take my knife and work it from the back of the
binding plate to the front. Be careful on this move with the knife.
Just get the knife under the plate and work free the glue tape. Don't
pry up but move the knife along. This works every time. Hard to
beleive you've never taken one of these off after all the knowlege and
experience you have.
  #3  
Old February 10th 09, 12:45 AM posted to rec.skiing.nordic
[email protected]
external usenet poster
 
Posts: 327
Default How to remove Salomon SNS Profil binding?

Snap off the plastic thing, and you will see the main screw.

Note that Solmon screws are not phillips, even though they look like a
regular cross, and they are made of hardenned steal. Cheapo
screwdriviers almost definitely will get stripped (if your ski shop
mounted the bindgins faithfully). I would get a badass screwdriver, or
better yet, get a specialized Salomon screwdriver
  #4  
Old February 10th 09, 01:34 AM posted to rec.skiing.nordic
ED3
external usenet poster
 
Posts: 5
Default How to remove Salomon SNS Profil binding?


wrote in message
...
Snap off the plastic thing, and you will see the main screw.

Note that Solmon screws are not phillips, even though they look like a
regular cross, and they are made of hardenned steal. Cheapo
screwdriviers almost definitely will get stripped (if your ski shop
mounted the bindgins faithfully). I would get a badass screwdriver, or
better yet, get a specialized Salomon screwdriver


I believe that's a pozi-drive screw head you're referring to;...maybe a
#3...if the screws are sealed with epoxy, warming them will soften the
epoxy's bond.


  #5  
Old February 10th 09, 01:56 AM posted to rec.skiing.nordic
[email protected]
external usenet poster
 
Posts: 572
Default How to remove Salomon SNS Profil binding?

Where do you find a posidrive? I looked around a few months ago and
failed.

Gene

"ED3" wrote:


wrote in message
...
Snap off the plastic thing, and you will see the main screw.

Note that Solmon screws are not phillips, even though they look like a
regular cross, and they are made of hardenned steal. Cheapo
screwdriviers almost definitely will get stripped (if your ski shop
mounted the bindgins faithfully). I would get a badass screwdriver, or
better yet, get a specialized Salomon screwdriver


I believe that's a pozi-drive screw head you're referring to;...maybe a
#3...if the screws are sealed with epoxy, warming them will soften the
epoxy's bond.


  #6  
Old February 10th 09, 02:14 AM posted to rec.skiing.nordic
[email protected]
external usenet poster
 
Posts: 23
Default How to remove Salomon SNS Profil binding?

On Feb 9, 6:56*pm, wrote:
Where do you find a posidrive? *I looked around a few months ago and
failed.

Gene

"ED3" wrote:

wrote in message
....
Snap off the plastic thing, and you will see the main screw.


Note that Solmon screws are not phillips, even though they look like a
regular cross, and they are made of hardenned steal. Cheapo
screwdriviers almost definitely will get stripped (if your ski shop
mounted the bindgins faithfully). I would get a badass screwdriver, or
better yet, get a specialized Salomon screwdriver


I believe that's a pozi-drive screw head you're referring to;...maybe a
#3...if the screws are sealed with epoxy, warming them will soften the
epoxy's bond.


Tornar Toolworks: http://www.tognar.com
  #7  
Old February 10th 09, 02:17 AM posted to rec.skiing.nordic
[email protected]
external usenet poster
 
Posts: 23
Default How to remove Salomon SNS Profil binding?

On Feb 9, 7:14*pm, wrote:
On Feb 9, 6:56*pm, wrote:



Where do you find a posidrive? *I looked around a few months ago and
failed.


Gene


"ED3" wrote:


wrote in message
....
Snap off the plastic thing, and you will see the main screw.


Note that Solmon screws are not phillips, even though they look like a
regular cross, and they are made of hardenned steal. Cheapo
screwdriviers almost definitely will get stripped (if your ski shop
mounted the bindgins faithfully). I would get a badass screwdriver, or
better yet, get a specialized Salomon screwdriver


I believe that's a pozi-drive screw head you're referring to;...maybe a
#3...if the screws are sealed with epoxy, warming them will soften the
epoxy's bond.


Tornar Toolworks: * *http://www.tognar.com


I meant Tognar
  #8  
Old February 10th 09, 03:05 AM posted to rec.skiing.nordic
John Forrest Tomlinson
external usenet poster
 
Posts: 447
Default How to remove Salomon SNS Profil binding?

On Mon, 9 Feb 2009 18:56:35 -0700, wrote:

Where do you find a posidrive? I looked around a few months ago and
failed.


Alpine ski shops often sell them. And a few other places -- here's an
example

http://www.reliableracing.com/catego...S (POSIDRIVER)
  #9  
Old February 10th 09, 06:20 AM posted to rec.skiing.nordic
[email protected]
external usenet poster
 
Posts: 572
Default How to remove Salomon SNS Profil binding?

Lot easier to find when spelled pozidrive. For example,
http://www.sears.com/shc/s/OrderItem...:InitiateLogon
and
http://www.wihatools.com/300seri/313serie.htm#Extra Long PoziDriv




John Forrest Tomlinson wrote:

On Mon, 9 Feb 2009 18:56:35 -0700, wrote:

Where do you find a posidrive? I looked around a few months ago and
failed.


Alpine ski shops often sell them. And a few other places -- here's an
example

http://www.reliableracing.com/catego...S (POSIDRIVER)

  #10  
Old February 10th 09, 01:15 PM posted to rec.skiing.nordic
ED3
external usenet poster
 
Posts: 5
Default How to remove Salomon SNS Profil binding?

Maybe not Homer's depot, but a good hardware store, or tool supply house
will at least have bits; a good addition to one's wax box. I don't recall
seeing a binding screw that wasn't driven by a #3 pozidrive/posidrive.
ED3
wrote in message
...
Lot easier to find when spelled pozidrive. For example,

http://www.sears.com/shc/s/OrderItem...:InitiateLogon
and
http://www.wihatools.com/300seri/313serie.htm#Extra Long PoziDriv




John Forrest Tomlinson wrote:

On Mon, 9 Feb 2009 18:56:35 -0700, wrote:

Where do you find a posidrive? I looked around a few months ago and
failed.


Alpine ski shops often sell them. And a few other places -- here's an
example


http://www.reliableracing.com/catego...S (POSIDRIVER)


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
replacing rubber plug for Solomon Profil binding mike Nordic Skiing 6 December 25th 07 01:29 PM
Using Salomon Pilot 2 Classic Boots With Older Profil Classic Binding. ADK Skier Nordic Skiing 7 November 8th 06 09:45 PM
HELP: Profil binding dias-assembly Tony Curran Nordic Skiing 5 November 29th 05 01:39 AM
a profil binding question pls. [email protected] Nordic Skiing 0 November 14th 05 07:55 PM
removing rear fastener on sns profil binding Chris Crawford Nordic Skiing 3 February 26th 05 01:29 AM


All times are GMT. The time now is 02:05 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 SkiBanter.
The comments are property of their posters.