If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Waxing:Vise Set or Profile?
I'm new to this group and I've learned a lot already. I'm planning to
start doing my own waxing on my skis. I've looked at the descriptions in catalogues for vice sets (like Swix Caploc) and profiles. Does anyone have some thoughts on which would be a better way to go? Also, what are the best irons in the $100 range?Thanks |
Ads |
#2
|
|||
|
|||
On 9 Jan 2005 14:30:41 -0800, "silvertip"
wrote: I'm new to this group and I've learned a lot already. I'm planning to start doing my own waxing on my skis. I've looked at the descriptions in catalogues for vice sets (like Swix Caploc) and profiles. Does anyone have some thoughts on which would be a better way to go? Also, what are the best irons in the $100 range?Thanks Vises are often more portable and perhaps can fit a wider range of skis (like super short kids skis, or other things that a typical profile might not work well on. But a profile is better for hard work like using a structure tool, etc. If space at home and portability are not very important, get a profile. I have a profile I use at home and the Swix Caploc. The Caploc is nice for travel, but it's kind of fragile and I don't use it at home. JT **************************** Remove "remove" to reply Visit http://www.jt10000.com **************************** |
#3
|
|||
|
|||
On Sun, 9 Jan 2005, John Forrest Tomlinson wrote: On 9 Jan 2005 14:30:41 -0800, "silvertip" wrote: I'm new to this group and I've learned a lot already. I'm planning to start doing my own waxing on my skis. I've looked at the descriptions in catalogues for vice sets (like Swix Caploc) and profiles. Does anyone have some thoughts on which would be a better way to go? Also, what are the best irons in the $100 range?Thanks Vises are often more portable and perhaps can fit a wider range of skis (like super short kids skis, or other things that a typical profile might not work well on. But a profile is better for hard work like using a structure tool, etc. If space at home and portability are not very important, get a profile. I have a profile I use at home and the Swix Caploc. The Caploc is nice for travel, but it's kind of fragile and I don't use it at home. Profiles are no less portable than skis and poles. And they're better for lots of ski work. When I was travelling w/o a car I always put the profile in the ski bag. In the wax bag I started with a pair of vices to clamp the profile into. Then I learned by observing that even better than vices was to carry 1 or 2 C-clamps with a very large opening. This makes it possible to clamp the profile onto a large variety of supports. -Mitch |
#4
|
|||
|
|||
If you are going to get a profile, nake sure it is an adjustable one if
you are going to be working on a variety length/width of ski. The newest Toko Profile fits this category, as does a profile I saw at Freewheel and Heel in West Yellwstone. Make sure to get C-clamps or Bar clamps to fix it in place. Dan Vargo SLC, UT In article .com, silvertip wrote: I'm new to this group and I've learned a lot already. I'm planning to start doing my own waxing on my skis. I've looked at the descriptions in catalogues for vice sets (like Swix Caploc) and profiles. Does anyone have some thoughts on which would be a better way to go? Also, what are the best irons in the $100 range?Thanks |
#5
|
|||
|
|||
Silvertip,
Swix has a very good waxing iron for $60 list. I have not found any discounts in mail order catalogs. Reliable Racing Supply has a "Performance" wax iron for $45 http://www.reliableracing.com/winter...&category=2100 They have on back order the Swix Econo wax iron, but they include five different colors of Swix CH glide wax (that's at least $30 of wax) for free. http://www.reliableracing.com/winter...&category=2100 The Swix irons (all of them) have number settings on both the iron and the packages of glide wax. If you are starting out, Eagle River Nordic's online wax book http://www.ernordic.com/waxbook.htm will give you an OK base line. Their paper book BK-121 has more information than what is online. In the kitchen dept of Kmart is a digital meat thermometer for $12 that goes down to -40 for defrosting. It has a Celcius/Farenhight switch, which other digital thermometers don't have. Cheers, Bruce Freeburger silvertip wrote: I'm new to this group and I've learned a lot already. I'm planning to start doing my own waxing on my skis. I've looked at the descriptions in catalogues for vice sets (like Swix Caploc) and profiles. Does anyone have some thoughts on which would be a better way to go? Also, what are the best irons in the $100 range?Thanks |
#6
|
|||
|
|||
I bought the Econo iron from Reliable Racing earlier this winter, and
it worked great (and the CH wax made it an irresistable buy); I liked it so much I ordered a second one, although it's been 2 weeks on back order. That one will go as a belated Xmas present. For good articles on waxing, see what you can get Googling. I liked the Tognar site, myself. Bruce Freeburger wrote: Silvertip, Swix has a very good waxing iron for $60 list. I have not found any discounts in mail order catalogs. Reliable Racing Supply has a "Performance" wax iron for $45 http://www.reliableracing.com/winter...&category=2100 They have on back order the Swix Econo wax iron, but they include five different colors of Swix CH glide wax (that's at least $30 of wax) for free. http://www.reliableracing.com/winter...&category=2100 The Swix irons (all of them) have number settings on both the iron and the packages of glide wax. If you are starting out, Eagle River Nordic's online wax book http://www.ernordic.com/waxbook.htm will give you an OK base line. Their paper book BK-121 has more information than what is online. In the kitchen dept of Kmart is a digital meat thermometer for $12 that goes down to -40 for defrosting. It has a Celcius/Farenhight switch, which other digital thermometers don't have. Cheers, Bruce Freeburger silvertip wrote: I'm new to this group and I've learned a lot already. I'm planning to start doing my own waxing on my skis. I've looked at the descriptions in catalogues for vice sets (like Swix Caploc) and profiles. Does anyone have some thoughts on which would be a better way to go? Also, what are the best irons in the $100 range?Thanks |
#7
|
|||
|
|||
Bruce Freeburger wrote: Silvertip, snip In the kitchen dept of Kmart is a digital meat thermometer for $12 that goes down to -40 for defrosting. It has a Celcius/Farenhight switch, which other digital thermometers don't have. Cheers, Bruce Freeburger My digital thermometer does not work well at temperatures much below -15C or -20C. The LCD readout fades because the battery does not seem to be rated for those low temperatures. Is the K-mart blue light special work at temps below -15C? That said, when it gets to -15C and colder, who cares. Just use Rode Special Green. Edgar |
#8
|
|||
|
|||
Bruce Freeburger wrote: Silvertip, snip In the kitchen dept of Kmart is a digital meat thermometer for $12 that goes down to -40 for defrosting. It has a Celcius/Farenhight switch, which other digital thermometers don't have. Cheers, Bruce Freeburger My digital thermometer does not work well at temperatures much below -15C or -20C. The LCD readout fades because the battery does not seem to be rated for those low temperatures. Is the K-mart blue light special work at temps below -15C? That said, when it gets to -15C and colder, who cares. Just use Rode Special Green. Edgar |
#9
|
|||
|
|||
Bruce Freeburger wrote: Silvertip, snip In the kitchen dept of Kmart is a digital meat thermometer for $12 that goes down to -40 for defrosting. It has a Celcius/Farenhight switch, which other digital thermometers don't have. Cheers, Bruce Freeburger My digital thermometer does not work well at temperatures much below -15C or -20C. The LCD readout fades because the battery does not seem to be rated for those low temperatures. Is the K-mart blue light special work at temps below -15C? That said, when it gets to -15C and colder, who cares. Just use Rode Special Green. Edgar |
#10
|
|||
|
|||
Thanks to everyone for the advice!
Ty in Burlington wrote: I bought the Econo iron from Reliable Racing earlier this winter, and it worked great (and the CH wax made it an irresistable buy); I liked it so much I ordered a second one, although it's been 2 weeks on back order. That one will go as a belated Xmas present. For good articles on waxing, see what you can get Googling. I liked the Tognar site, myself. Bruce Freeburger wrote: Silvertip, Swix has a very good waxing iron for $60 list. I have not found any discounts in mail order catalogs. Reliable Racing Supply has a "Performance" wax iron for $45 http://www.reliableracing.com/winter...&category=2100 They have on back order the Swix Econo wax iron, but they include five different colors of Swix CH glide wax (that's at least $30 of wax) for free. http://www.reliableracing.com/winter...&category=2100 The Swix irons (all of them) have number settings on both the iron and the packages of glide wax. If you are starting out, Eagle River Nordic's online wax book http://www.ernordic.com/waxbook.htm will give you an OK base line. Their paper book BK-121 has more information than what is online. In the kitchen dept of Kmart is a digital meat thermometer for $12 that goes down to -40 for defrosting. It has a Celcius/Farenhight switch, which other digital thermometers don't have. Cheers, Bruce Freeburger silvertip wrote: I'm new to this group and I've learned a lot already. I'm planning to start doing my own waxing on my skis. I've looked at the descriptions in catalogues for vice sets (like Swix Caploc) and profiles. Does anyone have some thoughts on which would be a better way to go? Also, what are the best irons in the $100 range?Thanks |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ride "Profile" What is this board good for? | Bob | Snowboarding | 4 | March 14th 04 08:14 PM |
does this fit scott's profile? | Dick Gozinya | Alpine Skiing | 6 | February 28th 04 01:50 PM |
Salomon Classic Profile Flexor Pulling Out | Amy Todd | Nordic Skiing | 7 | February 10th 04 09:42 PM |
If you carry your own waxing profile around... | JMC | Nordic Skiing | 1 | February 9th 04 09:10 PM |
Swix Nordic Profile Problem | Daniel Vargo | Nordic Skiing | 2 | November 22nd 03 11:16 PM |