If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Roller Skis at competitive prices
Serge's reply that the inexpensive ABEC 3 bearings are "slow bearings"
is a bit of a misnomer. They have frictional losses very minutely worse than expensive ceramic bearings. Compared to aerodynamic drag and wheel-on-pavement rolling resistance, these differences are negligible. Regards Chris revyakin wrote: Are slow ABEC bearings easy to find? I tried several rollerblade stores around me and they knew nothing about sllow bearings ("why would you want that?) (Serge) wrote in message . com... Used rollerskis have worn wheels or I am missing something. Your best bet is to buy beams w/axles and bindings (appr.$80US) and buy 100mm slow skating wheels (as little as $3 apiece) and slow bearings (8 @ 1.00 apiece) Total: $120US |
Ads |
#12
|
|||
|
|||
Roller Skis at competitive prices
Are slow ABEC bearings easy to find? I tried several rollerblade
stores around me and they knew nothing about sllow bearings ("why would you want that?) (Serge) wrote in message . com... Used rollerskis have worn wheels or I am missing something. Your best bet is to buy beams w/axles and bindings (appr.$80US) and buy 100mm slow skating wheels (as little as $3 apiece) and slow bearings (8 @ 1.00 apiece) Total: $120US |
#13
|
|||
|
|||
Roller Skis at competitive prices
Jeff: Yeah, you can get a lot of what you need from NS. But, that
being said, you can get duplicate axles/cap screws for just about anything from a good hardware store; frame spacers are easy to make; that leaves the frame and the wheels. Nordic Skate is the only supplier I can find for 100mm "rubber" wheels; Skates-away.com sells a 125mm solid rubber wheel that I will probably try this Spring or summer on the low hole of my Aero 150 frame; it'll be a bumpier ride for sure. Pete |
#14
|
|||
|
|||
Roller Skis at competitive prices
Back to my original question, anyone have anymore good sites or contacts
for the purchase of rollerskis for good prices. Thanks to those who already notified me! Adam PBDoyle wrote: Jeff: Yeah, you can get a lot of what you need from NS. But, that being said, you can get duplicate axles/cap screws for just about anything from a good hardware store; frame spacers are easy to make; that leaves the frame and the wheels. Nordic Skate is the only supplier I can find for 100mm "rubber" wheels; Skates-away.com sells a 125mm solid rubber wheel that I will probably try this Spring or summer on the low hole of my Aero 150 frame; it'll be a bumpier ride for sure. Pete |
#15
|
|||
|
|||
Roller Skis at competitive prices
Serge had earlier posted that a small washer spacer can be used to slow inline bearings.
-- Jeff Potter **** *Out Your Backdoor * http://www.outyourbackdoor.com publisher of do-it-yourself culture ... bikes, skis, boats & more! ... ... offering Vordenberg's XC ski tales in "Momentum"! ... ... "The Recumbent Bicycle": the only book about these bikes! ... ... Rudloe's "Potluck": true-life story of workingclass smuggling! ... ... with radical novels coming up via LiteraryRevolution.com! ... ... music! ... articles! ... travel forums! ... WOW! 800-763-6923 |
#16
|
|||
|
|||
Roller Skis at competitive prices
PBDoyle wrote:
Jeff: Yeah, you can get a lot of what you need from NS. But, that being said, you can get duplicate axles/cap screws for just about anything from a good hardware store; frame spacers are easy to make; that leaves the frame and the wheels. Nordic Skate is the only supplier I can find for 100mm "rubber" wheels; Skates-away.com sells a 125mm solid rubber wheel that I will probably try this Spring or summer on the low hole of my Aero 150 frame; it'll be a bumpier ride for sure. Pete So I guess all I need is the beams then, right? NS offer those? Serge says "everyone" has em. Predrilled by any chance? : ) -- Jeff Potter **** *Out Your Backdoor * http://www.outyourbackdoor.com publisher of do-it-yourself culture ... bikes, skis, boats & more! ... ... offering Vordenberg's XC ski tales in "Momentum"! ... ... "The Recumbent Bicycle": the only book about these bikes! ... ... Rudloe's "Potluck": true-life story of workingclass smuggling! ... ... with radical novels coming up via LiteraryRevolution.com! ... ... music! ... articles! ... travel forums! ... WOW! 800-763-6923 |
#18
|
|||
|
|||
Roller Skis at competitive prices
Chris Crawford wrote in message tnews.com...
Serge's reply that the inexpensive ABEC 3 bearings are "slow bearings" is a bit of a misnomer. They have frictional losses very minutely worse than expensive ceramic bearings. Compared to aerodynamic drag and wheel-on-pavement rolling resistance, these differences are negligible. I suggested ABEC-3 not because they are slow, but because they are cheap. Then you just pack them with heavy grease, that's all. Until you have 20 bearings on you speedskates telling the difference between types of bearings is difficult. I use grease-packed RUSTPROOF STAINLESS 608 bearings on my rollerskis so I can wash rollerskis down after rain no problem. These ARE slow! |
#19
|
|||
|
|||
Roller Skis at competitive prices
|
#20
|
|||
|
|||
Roller Skis at competitive prices
ABEC 3 are definitely not slow bindings - they are... well... simply
****ty bindings. From what I understand the ABEC classification does not have to do with speed - it has to do with quality. JENEX makes bona fide slow bindings - apparently they take regular ABEC stuff apart and put viscous lubricant inside. My 650 ATR rollerskis came with bindings like that. But I 've never heard them selling these slow bindings officially. Chris Crawford wrote in message tnews.com... Serge's reply that the inexpensive ABEC 3 bearings are "slow bearings" is a bit of a misnomer. They have frictional losses very minutely worse than expensive ceramic bearings. Compared to aerodynamic drag and wheel-on-pavement rolling resistance, these differences are negligible. Regards Chris revyakin wrote: Are slow ABEC bearings easy to find? I tried several rollerblade stores around me and they knew nothing about sllow bearings ("why would you want that?) (Serge) wrote in message . com... Used rollerskis have worn wheels or I am missing something. Your best bet is to buy beams w/axles and bindings (appr.$80US) and buy 100mm slow skating wheels (as little as $3 apiece) and slow bearings (8 @ 1.00 apiece) Total: $120US |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Near fatal ski incident | Me | Nordic Skiing | 22 | February 27th 04 01:47 PM |
Best advice for a first time xc'er | VISAMAN | Nordic Skiing | 17 | November 19th 03 11:20 PM |
Roller Ski companies belong to a small industry. Good news for Jenex. | Douglas Diehl | Nordic Skiing | 8 | September 29th 03 12:15 AM |
First time on roller skis | Ken Roberts | Nordic Skiing | 2 | September 12th 03 01:36 AM |
Roller Ski's For Bigger People | David Uzzell | Nordic Skiing | 4 | July 28th 03 12:57 AM |