If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
My boss suddenly claims that waxing is unnecessary...
Hey. I haven't even lurked here before but I was hoping to get some
quick info from a bunch of other people, and thought this might be the ideal place to shoot for. I've been waxing and tuning skis and snowboards for a local shop for a little while, and I do a pretty nice job for pretty cheap (10 bucks gets clean edges and a smooth wax). Suddenly, today, the guy hands me a couple of pages of paper and declares that we're not going to wax our skis or snowboards anymore. This, he says, is the "new school" way of doing things. A few (not verbatim) quotes from the pages: "basically these days almost all bases are made by one guy"; "the bases are not porous, they're just [sic] petex"; "you can paste wax to skis or a board but you're better off just shaving the top off the base"; and so on. I told him it smelled like bullhockey to me, but he insists it's legit and that it came from Snowbird, UT. I don't buy that, either. What I wanted to find out is, has anybody else heard this stuff? Is Snowbird actually endorsing this thing or did he get this info from some kook and lie about it? Also, I honestly don't have enough technical info to be able to directly say, for example, "K2's bases are all still porous of course and they're made out of Gobbledygook(tm)"; if one of you knows enough to be able to straight up call it baloney, I'd like to print it out and hand it to him. I don't think it'll make a difference to him; he's never been too hot on the idea of having to wax skis and snowboards, anyway. But I'm curious too, and want to make sure that the whole industry didn't change under my nose without my noticing. Thanks, - Rob. |
Ads |
#2
|
|||
|
|||
My boss suddenly claims that waxing is unnecessary...
There are actually 3 base material manufacturers. Crown plastics in Ohio,
P-tex and Isosport are both in Europe. As for not needing to wax, I'd simply put it to a test. Ride a pair of skis that are waxed and a pair that aren't. Alternate runs and see what works better. I think you'll find the waxed skis run better especially if you're using the right wax for the conditions. Sean Martin Donek Snowboards Inc. http://www.donek.com/ phone:877-53-DONEK "Rob" wrote in message om... Hey. I haven't even lurked here before but I was hoping to get some quick info from a bunch of other people, and thought this might be the ideal place to shoot for. I've been waxing and tuning skis and snowboards for a local shop for a little while, and I do a pretty nice job for pretty cheap (10 bucks gets clean edges and a smooth wax). Suddenly, today, the guy hands me a couple of pages of paper and declares that we're not going to wax our skis or snowboards anymore. This, he says, is the "new school" way of doing things. A few (not verbatim) quotes from the pages: "basically these days almost all bases are made by one guy"; "the bases are not porous, they're just [sic] petex"; "you can paste wax to skis or a board but you're better off just shaving the top off the base"; and so on. I told him it smelled like bullhockey to me, but he insists it's legit and that it came from Snowbird, UT. I don't buy that, either. What I wanted to find out is, has anybody else heard this stuff? Is Snowbird actually endorsing this thing or did he get this info from some kook and lie about it? Also, I honestly don't have enough technical info to be able to directly say, for example, "K2's bases are all still porous of course and they're made out of Gobbledygook(tm)"; if one of you knows enough to be able to straight up call it baloney, I'd like to print it out and hand it to him. I don't think it'll make a difference to him; he's never been too hot on the idea of having to wax skis and snowboards, anyway. But I'm curious too, and want to make sure that the whole industry didn't change under my nose without my noticing. Thanks, - Rob. |
#3
|
|||
|
|||
My boss suddenly claims that waxing is unnecessary...
Put the boss on an un-waxed snowboard and send him off to a transverse
trail with lots of long areas with very little pitch. See what he says after that. |
#4
|
|||
|
|||
My boss suddenly claims that waxing is unnecessary...
"Rob" wrote in message
om Suddenly, today, the guy hands me a couple of pages of paper and declares that we're not going to wax our skis or snowboards anymore. Your boss is dumb, you should see my board after one week of heavy riding. -- Posted via Mailgate.ORG Server - http://www.Mailgate.ORG |
#5
|
|||
|
|||
My boss suddenly claims that waxing is unnecessary...
A few (not verbatim) quotes from the pages: "basically these days
almost all bases are made by one guy"; "the bases are not porous, they're just [sic] petex"; "you can paste wax to skis or a board but you're better off just shaving the top off the base"; and so on. I told him it smelled like bullhockey to me, but he insists it's legit and that it came from Snowbird, UT. I don't buy that, either. Your boss is a complete idiot. Lets assume for a second that he's totally correct, and bases no longer need wax (yeah right). There are still millions of boards and skis out there with old bases on them that need wax, or does he assume that when this "new technology" comes out that 100% of riders will shell out $300+ for a new base? My condolences on having to work for such a dumb ****. |
#6
|
|||
|
|||
My boss suddenly claims that waxing is unnecessary...
Yep...this is where it ALL comes out.
I'm a big guy (6' tall, 250 LBs, size 13 boots) and on a long, almost level traverse, an unwaxed board for me stops dead. Now, with a properly waxed shorter board I can glide for miles.... Technically, someone should be able to dig up specs on the viscosity of PTex and other plastics vs. that of wax, no? aiki "Chet Hayes" wrote in message om... Put the boss on an un-waxed snowboard and send him off to a transverse trail with lots of long areas with very little pitch. See what he says after that. |
Thread Tools | |
Display Modes | |
|
|