![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Hi everybody!
I am a newbie of this newsgroup, and i have some questions about bX boards. I am italian, so my english could not be perfect... seal your ears Oxford people, OK? I want to buy a bX board, no matter how expensive, but good and reliable. i wanna do bX, so it doesn't matter if i can't go riding park or jumps. i've got some ideas about some boards, but i would know your opinion, too. Burton Dragon: very stiff but also good pop: allround, but not specific for bX T6: the best bX burton board; i tried this board and i found it superb, something like the glorious Johan 163 but a bit lighter Nitro Shogun: very good for me; stiff but not as extreme as the F2 Eliminator; too soft for high-end bX? Naturals: the board i like most; it has got the right balance (towards bX, of course) i am looking for Supra Team: i found it very similar to the Shogun; what do you think about it? F2 Eliminator; the natural born bX board; stiff as hell, very difficult to ride... long radius carve turns and striking control at high speed... Eliminator LTD: the LTD version is even stiffer then the base version; extreme board, how can a people land in a bX jump using such a monster? My favourite are the Natural and the Eliminator LTD (that has got a very cool graphic in the 2002 version ahaha ![]() I prefer to buy a 63,38 inches (161 cm) board, although i am 6 feet tall (182 cm) and my weight is about 250 pounds (82 kg). Do you think i need a 64,17 inches feet (163 cm)? Thank you very much for every advice/insult ![]() Keep on riding! |
Ads |
#2
|
|||
|
|||
![]()
Hi everybody!
I am a newbie of this newsgroup, and i have some questions about bX boards. I am italian, so my english could not be perfect... seal your ears Oxford people, OK? I want to buy a bX board, no matter how expensive, but good and reliable. i wanna do bX, so it doesn't matter if i can't go riding park or jumps. i've got some ideas about some boards, but i would know your opinion, too. I don't compete in BX but I enjoy running a course when I can, and I like the way BX -type boards ride for freeriding. BX boards typically have a large sidecut radius (in other words, a mellow sidecut) so that you can hide hard, on edge, without having the tendency to turn off the course. They are typically stiff enough to remain stable at high speeds. They should have enough pop to double-jump a series of rollers if you're going really fast, but not too much pop, you want them damp to hold an edge. Burton Dragon: very stiff but also good pop: allround, but not specific for bX T6: the best bX burton board; i tried this board and i found it superb, something like the glorious Johan 163 but a bit lighter The Dragon is a halfpipe board, too tight a sidecut and probablt too much pop. The T6 might also have too much sidecut. Nitro Shogun: very good for me; stiff but not as extreme as the F2 Eliminator; too soft for high-end bX? Naturals: the board i like most; it has got the right balance (towards bX, of course) i am looking for Supra Team: i found it very similar to the Shogun; what do you think about it? I don't know anything about these particular models... F2 Eliminator; the natural born bX board; stiff as hell, very difficult to ride... long radius carve turns and striking control at high speed... Eliminator LTD: the LTD version is even stiffer then the base version; extreme board, how can a people land in a bX jump using such a monster? I've heard really good things about the eliminator and Eliminator LTD. If they were available in the US I would try to demo one! In any case, not sure why landing jumps on a stiff board should be a problem. I take jumps on my Donek Axis 172 with hard boots and landings are incredibly stable. My favourite are the Natural and the Eliminator LTD (that has got a very cool graphic in the 2002 version ahaha ![]() Some other ideas: If you can find one (they don't make them anymore), the Salomon FRS. I have the 165 - here's a pic: http://www.tovino.com/frs/topsheet.JPG It's amazing on groomed runs and I have run it through a BX coarse at Mt Hood. I found it too stiff to take off-piste in soft boots though... although I did ride it in hard boots. Unfortunately mine is pretty much trashed. The Voelkl Cross - I don't think they make it anymore - and I've never seen one with my own eyes - but I've seen it discussed as favorably as the Salomon FRS. You might look at www.blue-tomoato.at for Voelkl. The larger Donek Inclines (164 and 168) might work well for BX as well. I prefer to buy a 63,38 inches (161 cm) board, although i am 6 feet tall (182 cm) and my weight is about 250 pounds (82 kg). Do you think i need a 64,17 inches feet (163 cm)? For racing BX you might want to go a bit longer - depending on the model of course, and how skilled a rider you are... you want as much stability as you can get! Mike T |
#3
|
|||
|
|||
![]()
The Voelkl Cross - I don't think they make it anymore - and I've never
seen one with my own eyes - but I've seen it discussed as favorably as the Salomon FRS. I've been told the Cross is the best BX board made to date, by someone who's opinion I'd put a good amount of faith in. Unfortunately, it's replacement, the Downhell aparently isn't so good. Rad Air makes the Project LSD. I've never ridden it, but the 164 comes with a 10.5 meter sidecut that should be ideal for BX. |
#4
|
|||
|
|||
![]()
Chiono wrote:
I prefer to buy a 63,38 inches (161 cm) board, although i am 6 feet tall (182 cm) and my weight is about 250 pounds (82 kg). Do you think i need a 64,17 inches feet (163 cm)? If you are 82 kg and 182 cm, you are 180 lbs and a little under 6 feet tall. In addition to the other boards mentioned here, consider the Prior Men's Freeride (MFR). Prior also used to make a very highly-regarded BX-specific board, if you contact Chris Prior I'm sure he could dust off the molds and build one for you that exactly suits your requirements. Neil |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fakie board recommendation | Skitzo | Snowboarding | 9 | May 13th 04 11:03 PM |
Donek Wide too "fast" a board for me? | Johnny1 | Snowboarding | 18 | December 6th 03 06:19 AM |
Board sizing... | Brett | Snowboarding | 1 | October 19th 03 11:07 PM |
Boots pinch front of ankle... Tall Rider | Brett | Snowboarding | 11 | October 7th 03 02:02 AM |
weight of board on life hurts knee | Baretta | Snowboarding | 1 | August 21st 03 11:54 PM |