Steel edge question
 

I bought and used for one season a pair of steel-edged XC skis. They
were a wax type. I really liked the steel edge. And wax works well in
really cold weather, like below 15F.

Since then I've moved to a warmer climate. The wax type skis are not
practical here, klister wax and all that is a pain, so I bought a pair
of no-wax skis, without a steel edge. I miss the steel edge when doing
backcountry skiing.

I've been thinking of modifying my wax type steel edged skis to have a
no-wax kick base. I will use a router to cut space in the bottom, then
insert a no-wax kick base salvaged from yet another pair of skis which I
found abandoned.

So I have two questions. Does anyone have any tips on how to do this
operation, like what type of glue to use?

And if steel edges are so great then why don't I see other people using
them? I've never seen anyone use a no-wax ski that had a steel edge.

Thanks for your help.

Howdy -

Fischer, Karhu, Rossignol and Trak all make waxless metal-edged skis. I'm
sure there are others. I have used the Fischer E99 crown waxless base
metal-edged skis for almost two decades and they are still being
manufactured. The steel edge is great for skiing off track in variable
conditions, on ice and hardpack.

Regards,
John

Hi Bruce

Alpina also makes a steel edged waxless XC touring ski... the ones I have
are the Tempest model, which may no longer be in production... I bought mine
last year and found that they were useless for hill climbing in the snow
conditions here (Northern Ontario) and switched this year to waxable... I
can now get up the hills around here with ease, but going downhill is
becoming an adrenaline charged experience... particularly as my local ski
club likes to put in 90 degree turns at the bottom of slopes... and I must
admit to missing the edges on the Alpina's

Hope this helps
Glenn

Bruce W.1 wrote in message ...
I bought and used for one season a pair of steel-edged XC skis. They
were a wax type. I really liked the steel edge. And wax works well in
really cold weather, like below 15F.

Since then I've moved to a warmer climate. The wax type skis are not
practical here, klister wax and all that is a pain, so I bought a pair
of no-wax skis, without a steel edge. I miss the steel edge when doing
backcountry skiing.

I've been thinking of modifying my wax type steel edged skis to have a
no-wax kick base. I will use a router to cut space in the bottom, then
insert a no-wax kick base salvaged from yet another pair of skis which I
found abandoned.

So I have two questions. Does anyone have any tips on how to do this
operation, like what type of glue to use?

And if steel edges are so great then why don't I see other people using
them? I've never seen anyone use a no-wax ski that had a steel edge.

Thanks for your help.

-----BEGIN PGP SIGNED MESSAGE-----

In article ,
Bruce W.1 wrote:
I bought and used for one season a pair of steel-edged XC skis. They
were a wax type. I really liked the steel edge. And wax works well in
really cold weather, like below 15F.

Since then I've moved to a warmer climate. The wax type skis are not
practical here, klister wax and all that is a pain, so I bought a pair
of no-wax skis, without a steel edge. I miss the steel edge when doing
backcountry skiing.

I've been thinking of modifying my wax type steel edged skis to have a
no-wax kick base. I will use a router to cut space in the bottom, then
insert a no-wax kick base salvaged from yet another pair of skis which I
found abandoned.

_ It's a lot simpler just to cut divots in the ptex. Take a look
at any waxless ski with a "negative base" pattern[1]. Basically,
you just need to route small circles at an angle. I've found that
a Dremel tool with the right bit[2] and a small jig works
reasonably well. You'll need to practice on a pair of junk skis
to get everything tweaked. All in all, it's a lot easier just to
buy the right skis. I only do this when there is no ski I can buy
that matches what I want.


So I have two questions. Does anyone have any tips on how to do this
operation, like what type of glue to use?

_ I would not recommend routing out the whole base and glueing in
a new one. It's not neccesary and likely won't work very well.


And if steel edges are so great then why don't I see other people using
them? I've never seen anyone use a no-wax ski that had a steel edge.


_ You don't get out enough...%-) They are very common in the
Sierra. All the major XC ski manufacturers make them, they're
generally called backcountry skis. In general, they make a lot
of sense if you ski somewhere with very variable conditions.
Waxing is better when it works, but it doesn't always work.

_ One alternative that you might consider is kicker skins for
your waxable skis if you have stable conditions. While they
aren't as fast as klister, they work pretty well and are a lot
easier to deal with.

http://www.bdel.com/gear/backcountry/kicker_skins.php

_ Booker C. Bense

[1]- Fischer Rebound is a good example and a mighty fine ski to
boot.

[2]- Once you go to the display and look at all the small steel
cutter bits, it's obvious.

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBQb+H4GTWTAjn5N/lAQF/HwP/b4QjGt92ropTt0dBArMdTfP//25FzcyE
q7raSgR6MgWgaPxjZ0Mp2vzv8Gfr/0uaCjjrGibrVAgy3+oD3ossEGprXzXK2hkQ
M1c2dzi0d7GPrqF1phXykqIry+ICJx4oT8mOrE+l+5GkBV2yzk TGK+JSIX5U/pMu
4HznlxCXwGg=
=Lt74
-----END PGP SIGNATURE-----

I have no wax skis with a steel edge. I bought them prior to last
winter. I find that on down hills, I only have to THINK about turning
to cut a turn!

I live in upstate New York, where we can get anything from below zero
to above freezing in the winter.

My only complaint: the edges have rusted a bit, probably from riding
on top of the car on damp days.

Bill in Schenectady wrote:
I have no wax skis with a steel edge. I bought them prior to last
winter. I find that on down hills, I only have to THINK about turning
to cut a turn!

I live in upstate New York, where we can get anything from below zero
to above freezing in the winter.

My only complaint: the edges have rusted a bit, probably from riding
on top of the car on damp days.

rust on steel edges
I have been using with great success "Notwax" as an all purpose wipe on
wax and It says it is now improved to prevent rusting on steel edges.
gr