SkiBanter

SkiBanter (http://www.skibanter.com/index.php)
-   Snowboarding (http://www.skibanter.com/forumdisplay.php?f=3)
-   -   Wide board (if I have to) question (http://www.skibanter.com/showthread.php?t=16142)

helibrdr October 2nd 07 07:38 PM

Wide board (if I have to) question
 
Ok folks, after reading the lack of posts post (is that grammatically
correct?) I will fire out the first "what board for......" question. After
my son's last growth spurt (all upwards) he is 5-10, 135 lbs, with size
11.5/12 feet. With his foot size and stance (duck +/- 15) I am afraid I will
have to go to a wide board, but with his weight I am really concerned about
response edge to edge. More info - Free ride only, Eastern Firm(tm) most of
the time, two trips a year to Utah a year for powder (hopefully) and
sometimes some spring sliding.

The floor is open - any ideas???

Thanks



Bob F October 2nd 07 08:27 PM

Wide board (if I have to) question
 

"helibrdr" wrote in message
...
Ok folks, after reading the lack of posts post (is that grammatically
correct?) I will fire out the first "what board for......" question. After my
son's last growth spurt (all upwards) he is 5-10, 135 lbs, with size 11.5/12
feet. With his foot size and stance (duck +/- 15) I am afraid I will have to
go to a wide board, but with his weight I am really concerned about response
edge to edge. More info - Free ride only, Eastern Firm(tm) most of the time,
two trips a year to Utah a year for powder (hopefully) and sometimes some
spring sliding.

The floor is open - any ideas???


The wide board definately helps with large feet. I was toeing out and heeling
out frequently on my old board. I picked up an old unused fatbob, and the
crashes ended. Risers might also solve the problem. I need to make some for my
other board and find out. My stance is very similar to your son's.

I never noticed any problem edge to edge.

Bob



Bas Mevissen October 2nd 07 10:22 PM

Wide board (if I have to) question
 
On Tue, 02 Oct 2007 15:38:29 -0400, helibrdr wrote:

The floor is open - any ideas???


Maybe buy a board with risers. Although I think that a wide board around
160cm lenght would be OK too. In powder, the extra surface would be a plus.

--
Bas.

Switters October 3rd 07 12:09 PM

Wide board (if I have to) question
 
On Tue, 02 Oct 2007 19:38:29 GMT, "helibrdr"
allegedly wrote:

The floor is open - any ideas???


I suspect that most of my thoughts are in the FAQ.

I have size 10 feet, and I ride what's commonly thought of as a *really*
wide board. When looking to go wide, I tried a 260mm board, and it wasn't
wide enough. I then rode a 270mm board for a number of years which was
fine. After those years of progress, I found I was digging in my
toes/heel more often, so switched to a 280mm board. I've not looked back
since.

I don't have a problem getting edge to edge. Perhaps that's to do with my
height (over 6ft) or my skill level (I prefer this explanation! :-)

My oft-used counter-point to the risers option is that if they were such a
great idea, why aren't "normal" footed people riding skinny boards with
risers?

Best bet is to get one on demo and see how it is for a day.

- Dave.

--
The only powder to get high on, falls from the sky.
http://www.vpas.org.uk/ - Snowboarding the worlds pow pow.
Donek Sasquatch 162, Prior Pow 181, Burton Canyon 162

The Snowboard FAQ lives here - http://www.vpas.fsnet.co.uk/rssFAQ/

Neil Gendzwill October 3rd 07 07:21 PM

Wide board (if I have to) question
 
helibrdr wrote:
Ok folks, after reading the lack of posts post (is that grammatically
correct?) I will fire out the first "what board for......" question. After
my son's last growth spurt (all upwards) he is 5-10, 135 lbs, with size
11.5/12 feet. With his foot size and stance (duck +/- 15) I am afraid I will
have to go to a wide board, but with his weight I am really concerned about
response edge to edge. More info - Free ride only, Eastern Firm(tm) most of
the time, two trips a year to Utah a year for powder (hopefully) and
sometimes some spring sliding.


He'll have significant toe/heel drag at those angles on a standard (25
cm) waisted board. If all he does is skid and spin like most kids,
probably not a concern. If he's skilled at putting the board on edge
and actually carving, then he's going to get bootout.

Neil

helibrdr October 3rd 07 11:31 PM

Wide board (if I have to) question
 

"Neil Gendzwill" wrote in message
...
helibrdr wrote:
Ok folks, after reading the lack of posts post (is that grammatically
correct?) I will fire out the first "what board for......" question.
After my son's last growth spurt (all upwards) he is 5-10, 135 lbs, with
size 11.5/12 feet. With his foot size and stance (duck +/- 15) I am
afraid I will have to go to a wide board, but with his weight I am
really concerned about response edge to edge. More info - Free ride only,
Eastern Firm(tm) most of the time, two trips a year to Utah a year for
powder (hopefully) and sometimes some spring sliding.


He'll have significant toe/heel drag at those angles on a standard (25 cm)
waisted board. If all he does is skid and spin like most kids, probably
not a concern. If he's skilled at putting the board on edge and actually
carving, then he's going to get bootout.

Neil


Neil,

No I brought him up right! ;-) He loves to carve, enjoys powder when he can
get it, and is starting to get pretty good in the trees. I am taking him
cat-boarding with me next year.

Thanks - I am looking at a Burton Custom Wide (or a slightly used Canyon
since it is the same board)



jw[_2_] October 4th 07 02:34 AM

Wide board (if I have to) question
 
In article ,
"helibrdr" wrote:

Ok folks, after reading the lack of posts post (is that grammatically
correct?) I will fire out the first "what board for......" question. After
my son's last growth spurt (all upwards) he is 5-10, 135 lbs, with size
11.5/12 feet. With his foot size and stance (duck +/- 15) I am afraid I will
have to go to a wide board, but with his weight I am really concerned about
response edge to edge. More info - Free ride only, Eastern Firm(tm) most of
the time, two trips a year to Utah a year for powder (hopefully) and
sometimes some spring sliding.

The floor is open - any ideas???


Good evening gents.

Santa Cruz makes some great wide boards. Let's see, if you have size
11.5 feet, I could get the specs on a good wide board, but K2 makes the
Fat Bob....(do they still?). Burton has a couple wide boards this year,
can get info and will post it tomorrow a.m. Have not seen the other
replies yet, so you may already be set...excuse redundant info, if so.

My SC 164W (W for "wide" as you may know) is super responsive edge to
edge. It's a wide board for big mtn. (I have size 9 feet, weigh 160,
5'9" - can convert to cm for you out of towners....I know we're
backwards here in the U.S.....;) It's a light board...etc. Way more
responsive than I thought it would be, just wanted a "longboard" in my
quiver. It's the most stable board at high spd. that I've ever ridden,
hard pack AND powder.

Sorry I can't be of more help at the momentt. Pls. feel free to email if
you have further questions! Good Luck!!!!

-jw

Bas Mevissen October 4th 07 08:01 AM

Wide board (if I have to) question
 
On Wed, 03 Oct 2007 19:31:11 -0400, helibrdr wrote:

Thanks - I am looking at a Burton Custom Wide (or a slightly used Canyon
since it is the same board)


I myself (as a bigfoot) liked the concept of the K2 Recon Riser. That
board (from last year) is now sold for a low price.

Unfortunately, I did not have a chance to test drive. But it looks quite
OK for lightweight bigfoots :-)

Maybe you can consider it as an option. Although the Custom Wide sounds OK
too.

(Silently hearing Freddy Mercury singing "I want them all!" :-)))
--
Bas.

Neil Gendzwill October 4th 07 02:29 PM

Wide board (if I have to) question
 
helibrdr wrote:

No I brought him up right! ;-) He loves to carve, enjoys powder when he can
get it, and is starting to get pretty good in the trees. I am taking him
cat-boarding with me next year.

Thanks - I am looking at a Burton Custom Wide (or a slightly used Canyon
since it is the same board)


It just wouldn't be an rss response if I didn't recommend one of our
beloved companies - check out Donek, I believe the Phoenix comes in a 27
cm width and would be a good choice for him.

Neil

Switters October 4th 07 04:59 PM

Wide board (if I have to) question
 
I did a (tiny) bit of research over my lunch break to see what wide boards
were out there, for normal length boards around the 160cm mark.

Burton don't seem to have anything over 26cm, and their site is a
nightmare if you don't have a fast line.

Salamon - Asides from having to navigate another awful flash-based web-
site, which doesn't actually fit my browser properly, I had to
individually hover over each board in order to see something about them,
before finally hiting on the Patrol, advertised for big feet. But again,
only 26.2cm.

Donek are still doing the trusty Wide and Sasquatch versions, which is
great news. If only they did a fat nosed powder board, I'd be well happy.
By far the cleanest web-site and so easy to get to the specs and compare
the range. Plus there's the Phoenix 163W which sits between the Wide and
Sasq, at least in terms of width.

Prior don't have much wider than 26cm. The only one being the 168XW
Freeride board at 27cm. Not what I would call Xtra-Wide, and way too long
for my liking.

If I had to buy something right now, based on that research, it would have
to be another Donek Sasquatch.

Clearly there just isn't the market for wide boards. Most people don't
snowboard properly anyway and go from one skid to the next, and that's
where the money is. I bet the sales figures on the Sasquatch are minimal.

- Dave.

--
The only powder to get high on, falls from the sky.
http://www.vpas.org.uk/ - Snowboarding the worlds pow pow.
Donek Sasquatch 162, Prior Pow 181, Burton Canyon 162

The Snowboard FAQ lives here - http://www.vpas.fsnet.co.uk/rssFAQ/


All times are GMT. The time now is 09:01 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
SkiBanter.com